a1. Caspian or government standard slide - $210.00

a2. Caspian or STI long slide - $270.00

a3. Caspian damascus slide - $695.00

a4. Slide with front scallop (standard), radius, or unique/no scallop or radius

a5. Any model slide with an external extractor - $35.00

a6. Custom fit slide to frame with minimum of tolerance - $175.00

a7. Weld frame rails and fit slide to frame - $225.00

a8. Accu-rail system fit of slide to frame - $265.00

a9. Lower ejection port and flare slide - $55.00

a10. Machine disconnector rail/breech for the Marvel disconnector cut (improves reliability) - $40.00

a11. Correct breech face and polish (includes correcting the feeding relief) - $30.00

a12. Marvel disconnector cut and breech face correction (s10 and s11) - $60.00

a13. Cut government slide to commander length - $60.00

a14. Machine commander cut slide for bushing - $65.00

a15. “Bull nose” shape the front of the slide (bull barrel only – includes custom reverse plug) - $150.00

a16. Browning hi-power style cut on front of the slide  - $75.00

a17. Machine for reverse plug (includes reverse plug) - $50.00

a18. Bevel lower edges of slide and correct slide's edge bevels (standard on all packages) - $30.00

a19. Cocking serrations custom cut into the slide, front or rear - $85.00

a20. Cocking serrations custom cut into the slide, both front and rear  - $140.00

a21. “Texas border” cut top edge of slide where the “round” meets the flat of the slide - $50.00

a22. Border cut both the top and lower edge of the slide bevel - $80.00

a23. Stipple the rear of the slide and bevel edges - $35.00

a24. Serrate the rear of the slide and bevel edges (40 lpi) - $55.00

a25. Checker the rear of the slide and bevel edges (40 lpi) - $90.00

a26. Heavy or mild melt of all slide edges/corners - $100.00

a27. Mill flat on top of slide (approx .375” wide) - $55.00

There are two “arrow” patterns available: arrow or aztec.

a28. Mill top of slide flat and ‘”arrow” or “aztec" pattern the top of the slide - $150.00

a29. “Arrow” or “aztec” pattern a round top/standard slide - $110.00

a31. Marvel pattern cut (seven lines) onto the top of the slide - $145.00

a32. Stipple the top of the slide and the rear of the slide / border cut the top edge of slide - $125.00

a33. Stipple the top and rear of the slide / border cut the top edge and  bevel lower edge of the slide - $145.00

a34. Stipple the top of the slide and Marvel pattern cut the top / stipple rear and border cut top - $160.00

a35. Stipple the top of the slide and “deep arrow” pattern the top of the slide - $150.00

a37. Tri-cut top of slide / stipple top flat and border cut top and side edges - $190.00

a38. Tri-cut top of slide, and arrow or aztec line cut the top flat - $200.00

a40. Custom line cuts on the side of the slide (price may vary according to complexity) - $65.00

a41. Machine slide for reverse plug (includes plug) - $65.00

a42. Standard recoil plug, interior dressed - $18.00

a43. "Steel cut" slide to reduce the weight of slide for shooting steel plate matches (different methods are discussed with the customer) - $265.00